Matters needing attention when using steel wire mesh: First, in the construction of steel wire mesh, the mesh should be above the rough surface or sharp edge; construction personnel should pay attention to safety protection when loading and unloading steel plate.

　　鋼網若放置時間過長，施工時應進行除銹處理，若有嚴重的酸腐蝕，周圍的堿煙無法使用，應予以。

　　If the steel mesh is placed too long, the construction should be rust removal treatment, if there is serious acid corrosion, the surrounding alkali smoke can not be used, it should be eliminated.

　　鋼網片在受沖擊大、變形嚴重、搭接脫落、修復或更換時，不得勉強使用。

　　Steel meshes shall not be used reluctantly when subjected to heavy impact, serious deformation, lapping off, repairing or replacing.

　　淘氣泥灰泥受污物污染或嵌在凈砂漿上，泥灰顆粒等異物可能引起磨損，應清洗干凈，自然晾干后。

　　The naughty mortar is contaminated by dirt or embedded in the clean mortar. Foreign bodies such as mud particles may cause wear and tear. It should be cleaned and dried naturally.

　　織物面料出口嚴格時,鋼筋件鍍鋅一般分為兩種形式,一是鍍鋅絲用于焊接,另一個是黑絲(或冷軋帶肋鋼筋),完成后焊接鍍鋅完成鍍鋅工廠后,出口鋼網與后者,即焊后,電鍍過程效果好,堅實的焊點。

　　When fabric export is strict, steel bar galvanizing is generally divided into two forms, one is galvanized wire for welding, the other is black wire (or cold-rolled ribbed steel bar). After the completion of galvanized factory, the export steel mesh and the latter, that is, after the first welding, the galvanized process has good effect and solid solder joints.

　　很少直接出口而不鍍鋅。

　　It seldom exports directly without galvanizing.

　　在制作屏幕時經常會遇到是否留下毛邊和沒有毛邊的情況，大多數導出的毛邊都不是左毛邊，也很少有情況下會有左毛邊。

　　When making a screen, we often encounter the situation of whether or not there is a wool edge and no wool edge. Most of the exported wool edges are not left wool edges, and seldom have left wool edges.

　　還需要注意的是熱浸鍍鋅鋼絲網片的鋅含量相對較高的一般可以達到250 g使用壽命長,不易腐蝕和生銹,質量高,焊接點相對穩固,美麗的外表,所以一般出口更多,具體規格根據客戶要求定制。

　　It should also be noted that the relatively high zinc content of hot dip galvanized steel wire mesh can generally reach 250 g long service life, not easy to corrosion and rust, high quality, relatively stable welding points, beautiful appearance, so generally more exports, specific specifications are customized according to customer requirements.